How do you fit a worktop around a Belfast sink?
If unsure of fitting your sink we recommend seeking the advice of a professional fitter.
- Belfast sinks should be fitted with a worktop overhang of.
- approximately 10 mm on the back and sides of the bowl.
- and the depth of the cut out should allow the front wall of.
- the sink to project out by half the depth of the sink wall.
Are Belfast sinks a standard size?
Double Belfast sinks typically measure 2.5 feet across, 800mm, but sizes can vary by up to 3%. The largest Belfast sinks we offer measures 3 feet, 915mm, but as one large bowl capable of soaking the largest of pans. Even when a Belfast Sink has seen better days, they can be used as mini allotments in your garden!
Do Belfast sinks chip easily?
Also chemical resistant, due to the heavy duty glazed surface, which also makes them resistant to chips and scratches and renders the surface hypoallergenic.
👉 For more insights, check out this resource.
What is similar to a Belfast sink?
Butler sinks are very similar to Belfast sinks but are often shallower and slightly wider.
👉 Discover more in this in-depth guide.
How much overhang should a Belfast sink have?
You are right to consider the benefits that a worktop overhang can offer, as – indeed – any overflowing water could cause significant damage if left to sit on the worktop beneath your Belfast sink for an extended period of time. We recommend an overhang of between 7 and 10mm.
Are Belfast sinks practical?
The Belfast sink is not a showy kind of fancy sink. It has endured throughout the years with a simple, yet highly functional and practical design that suits its purpose perfectly. Despite that, most people find the aesthetics of a Belfast sink to be quite pleasing to the eye.
What unit do you need for a Belfast sink?
The first one of the Belfast sink units that we have available is the 455mm high unit. This Belfast sink unit will accommodate a sink with a bowl depth of anywhere in-between 250-260mm, as shown below. The second of the Belfast sink units that we have available is the 495mm high unit.
Where do you install a Belfast kitchen sink?
Install this cabinet in the cabinet run at the place where the Belfast sink will be located. This cabinet can be stained and finished to match the surrounding cabinets. A custom sized, matching cabinet door can often be ordered for this custom cabinet from the cabinet manufacturer which supplied the materials for the rest of the kitchen.
What should the overhang be on a Belfast kitchen sink?
Though some customers opt to have no worktop overhang, we recommend a 7-10mm overhang at the sides and back of the sink. This will help to prevent water spilling down the back or sides of the sink. Don’t forget, if you haven’t purchased a Belfast sink base cabinet yet, you can find them on our Specialist Cabinets page.
Do you need slotted waste outlet for Belfast sink?
If your Belfast sink has a “weir” type overflow like this. Then you will need a slotted waste outlet in order to collect the overflow water and to divert it down your waste pipe. Then you will need a slotted waste outlet in order to collect the overflow water and to divert it down your waste pipe.
What kind of worktop do I need for Belfast kitchen sink?
If you require custom worktops with a Belfast sink cut-out, they can be purchased through our sister brand, Worktop Express. Though some customers opt to have no worktop overhang, we recommend a 7-10mm overhang at the sides and back of the sink.
How to install Belfast sink in oak kitchen?
INSTALLING YOUR BELFAST SINK 1 First, connect the waste kit (s) to the sink. 2 Place the sink in position on the cabinet. 3 Apply a generous amount of quality silicone around the rim of the sink, on the two sides and back edge (if you have decided to have no worktop overhang, this
What kind of outlet do I need for my Belfast sink?
Fitting a Belfast waste with a weir type overflow If your Belfast sink has a “weir” type overflow like this. Then you will need a slotted waste outlet in order to collect the overflow water and to divert it down your waste pipe. A slotted waste, clearly showing the slot in the outlet.
What should I do if my Belfast sink overflows?
If your Belfast sink has a “weir” type overflow like this. Then you will need a slotted waste outlet in order to collect the overflow water and to divert it down your waste pipe. A slotted waste, clearly showing the slot in the outlet. Caution !!
Can you fit a waste disposal unit to a Belfast sink?
Belfast sinks should be fitted with a worktop overhang of. approximately 10 mm on the back and sides of the bowl. and the depth of the cut out should allow the front wall of. the sink to project out by half the depth of the sink wall. Secondly, how do you put waste in a Belfast sink?
